Skip to main content

How suggested appointments work

How Commusoft works out which appointments to offer, what it reads to decide, and why the web and your booking portals show different slots.

Available on: Customer Journey and Automation (UK); Customer Journey and Field Automation (US). Not included on Go Paperless, All-in-One or Legacy plans.

When you book a job, Commusoft can work out who should go and when, rather than leaving you to check availability by hand. The same logic runs behind your booking portals, which is why a customer and your office can see different answers to what looks like the same question.


How a slot is chosen

For every appointment it might offer, Commusoft checks three things in turn:

  • Travel from the previous job or event — or from the technician's start location, if this would be their first of the day.

  • How long the job itself will take.

  • Travel to the next job or event — or to their end location, if it would be their last.

All of that has to fit inside the technician's shift. The slots that fit are offered, grouped by date, with the technicians available on each one.

Every event counts as somewhere, even without an address. A normal event with a location is included in the travel calculation. One without a location falls back to the technician's last known position, because the system still has to assume they are somewhere.


What it reads to decide

Five things, each of which can rule a technician out on its own.

Setting

The question it answers

What goes wrong when it is missing

Who is qualified for this job?

A technician missing the skill is never offered for it. The skill has to be on the job description template too

When is each person working?

Someone with no pattern cannot be offered at all

Which days is the company closed?

Work gets offered on days nobody is in

What arrival times can a customer be given?

With none set up, a booking portal has nothing to show

How much extra travel will you accept, and can overtime be offered?

Set too tight and good slots are never offered

Each person also needs a home address, on their Personal details. It is used as their start and end point for the day's travel.


What the maximum distance actually measures

In your route optimisation settings you can choose to apply a maximum distance, in miles, to portal bookings only or to both the web and portals.

That figure is the extra travel you are willing to accept for a job: the distance from the previous event to the suggested one, plus the distance from the suggested one to the next scheduled event. It is not a radius around your office, and it is not a daily mileage limit. Set it to 50 miles and you are saying a technician may travel up to 50 extra miles to fit that job in.

Distances are calculated from geocoded coordinates, not from postcode or ZIP alone. A partial address produces a less precise calculation, so a complete address on every property is what keeps this accurate.


Why the web and a portal show different slots

Both run on the same logic, but they present it differently, and both differences cause questions.

  • How many slots appear. On the web, you are shown only the first available service window for each technician on a day — your office can pick the day and book into it. A portal shows every available slot that day, because the customer needs a real choice. With Morning and Afternoon windows on an empty day, your office sees Morning and the customer sees both.

  • Whether distance is enforced. That depends on which option you chose. Set to portals alone, a slot your office can see may not be offered to a customer.


Using suggested appointments

Suggested appointments are reached from the job, not from the schedule. There is nothing to suggest until Commusoft knows which job it is placing.

  1. Open the job you want to book.

  2. Choose Add new diary event.

  3. Select Suggested appointment in the view bar.

  4. Review the slots offered, grouped by date.

  5. Select a slot and save.

Suggested appointments are optional. You can always book directly in the schedule instead, and manual bookings are not held to the distance limit or the overtime setting — though a technician's shift pattern still applies.


Worked examples

A slot offered on both the web and a portal. The technician works 09:00 to 18:00 and already has a job from 10:00 to 12:00. A new job is proposed about 25 minutes away. With distance not being considered, the slot fits the shift and is offered in both places.

A slot offered on the web but not in a portal. Same shift, with an existing job 30 minutes from the proposed one, and distance set to portals alone with a 10 mile limit. Your office is offered the slot; the customer is not, because the journey exceeds the limit you set for portal bookings.

A slot that only appears with overtime allowed. The technician works 08:00 to 16:00 and a job would run to 17:30. Without overtime slots enabled it is not offered at all. With them enabled it appears in both places.


Common questions

Which plans include suggested appointments?

Suggested appointments need Customer Journey or Automation in the UK, and Customer Journey or Field Automation in the US. They are not included on Go Paperless, All-in-One or Legacy plans.

That follows from what they rely on: both shift patterns and route optimisation settings are Customer Journey and above, and nothing can be suggested without a shift pattern. Public holiday templates and service windows are on all current plans.

Where do I find suggested appointments?

You find suggested appointments on the job, not on the schedule. Open the job, choose Add new diary event, then select Suggested appointment in the view bar.

There is no suggested option on the schedule on its own, because Commusoft needs to know which job it is placing before it can work out who could do it and when.

Why is a technician I expected not being offered?

A technician is not offered when one of the five settings rules them out. Check in this order: do they hold the skill the job asks for, and does the job description template carry it; does their shift pattern cover the slot; is the day blocked by a public holiday; does a service window exist for that arrival time; and does the journey fit inside your maximum distance?

Why does a customer see no availability when our schedule looks empty?

A customer sees no availability when the portal has nothing it can offer, even though the day looks free to you. The usual causes are no service windows set up, a maximum distance being enforced on portals, or technicians without a shift pattern. All three leave the schedule looking empty while the portal has nothing to show.

Why does a portal offer more times than we see in the office?

A portal offers more times because the two views are built for different people. The web shows only the first available service window for each technician on a day, on the basis that your office can choose the day and book into it. A portal shows every slot, because the customer is choosing for themselves.

Does the maximum distance limit how far a technician travels in a day?

No, the maximum distance does not limit a technician's total travel for the day. It applies to a single booking: the journey into the proposed job and back out to whatever follows it. A technician can cover considerably more ground across a full day of jobs that each sit inside the limit.

Did this answer your question?