Skip to main content

How to create an invoice in the mobile app

Bill a straightforward job before you leave site, and know when not to.

Bill a straightforward job before you leave site, and know when not to.

If your office has authorised it, you can raise the final invoice for a job on your phone. That closes the billing on site rather than leaving it for the office.

Important: Only raise a final invoice when all the work on the job is done. If another visit is needed or costs are still being agreed, leave invoicing to the office.

Note: Invoicing and completing a job from the app needs the Engineer with invoicing role or above. The Engineer and Engineer with diary roles cannot raise invoices or take payments.


When to do it, and when not to

Raise it on site when

  • The job is a single visit and it is finished

  • The scope is clear and all costs are confirmed

  • The parts and labor are recorded

  • The customer is ready to be billed

Leave it to the office when

  • Another visit is booked

  • The scope is still being agreed

  • Variations or extra costs are outstanding

  • You are not sure

Tip: If in doubt, ring the office. An invoice raised too early takes far longer to put right than one raised a day late.


Raising the invoice

When you complete the job

When you tap Leave and finish the visit, a green bar offers Job complete, View job report and Do nothing.

Tap Job complete and the completion actions appear:

  • Final invoice — raise the final invoice for the job.

  • FOC — complete the job free of charge, with no invoice.

  • Abort job — for a job that will not go ahead. Check with your office before using it.

Note: None of these actions are available while the job has linked variations. Your office needs to deal with the variations first.

If you tap Do nothing, you can come back to it later by tapping the green bar at the top of the job.

From the job

➡️ Open the job > tap the More menu > Invoices

Anything billable recorded against the job — parts, labor, service charges — appears here.

  1. Choose to raise a final invoice.

  2. Commusoft builds it from the costs recorded on the job.

  3. Review the line items before you confirm.

  4. Confirm.


Check these three things before confirming

  1. The parts — all listed, with the right quantities

  2. Labor and service charges — everything included

  3. The customer's billing address — correct

Important: Once an invoice is raised and sent, it cannot easily be recalled, and correcting it is a job for the office. Thirty seconds of checking is worth it.


Sending it to the customer

Once confirmed, send it from the app — by email, or through the invoice portal, depending on what the customer has asked for.

Once the invoice is raised, you can take payment against it. See How to take a payment in the mobile app.


Common questions

Can I invoice after the first of two visits?

No. Raise a final invoice only when all the work is done. If another visit is needed, leave invoicing until then, or ask the office about staged billing.

I raised the invoice and the amount is wrong.

Contact your office. A raised invoice is not something to fix from the app.

Why can I not see Final invoice, FOC or Abort job?

These actions are not available while the job has linked variations, and they need the Engineer with invoicing role or above. Ask your office to check the variations or your role.

Can I raise an interim or consolidated invoice on my phone?

No. Interim, Grant and Consolidated invoices are raised on the web only. From the app you can raise a final invoice.

I chose Do nothing when I left the job. Can I still invoice it?

Yes. Tap the green bar at the top of the job to bring the options back, then choose Job complete and Final invoice. The office can also do it from a computer.

What if the job should not be charged at all?

Use FOC from the completion actions to complete the job free of charge, without an invoice.

Did this answer your question?